Triatek Products

• Actuators
  - (ACT-FA-8001)

• Fume Hood Controllers
  - HMS 1650 Bacnet/N2
  - HMS 1650 LON
  - HMS 1600 LX
  - HMS 1600L (LON)
  - HMS 1600
  - VAV 1000

• Lighting Products
  - LP3500 Lighting Panel
  - LP-CT Lighting Panel

• LITE Monitors
  - FMS 1650LITE
  - HMS 1650LITE

• Network Gateways
  - Trigate Large
  - Trigate Small

• Remote Monitors
  - CMS 1650
  - FMS 1650R

• Room Pressure Controllers
  - FMS 1650 (Bacnet)
  - FMS 1650L (LON)
  - FMS 1650T (Thin)
  - FMS 1630L
  - FMS 1630B
  - FMS 1630
  - VAV 1000

• Sensors
  - Motion
  - Sash Height

• Venturi Valves
  - Overview
  - Operation
  - Options
  - Performance

VAV Controller: VAV 1000L

The TRIATEK VAV-1000L quickly and accurately controls airflow in laboratory zones that require pre-determined offsets between supply and exhaust air using proven TRIATEK control technology that can meet most airflow control requirements.

Exhaust CFM from fume hoods and general exhaust from a laboratory zone are summed by the VAV-1000L to calculate total exhaust CFM which is subtracted from the supply airflow CFM to calculate net airflow for the zone. Where net negative pressure for containment purposes is required, the VAV-1000L modulates supply airflow to be less than the total exhaust airflow.

Quick Specs

4 Analog Inputs:	4-20mADC, 0-5VDC or 0-10VDC
4 Analog Outputs:	0-5VDC or 0-10VDC
4 Digital Inputs:	0-5, 30VDC
4 Digital Outputs:	Open Collector 250mA
Input Impedance:	10k - 0 W
Output Impedance:	0 W -10k
Control Signal Wire Size:	18 AWG
Minimum Power Supply Class:	2 24 VAC/DC ± 10%, 10 VA 110 to 24 VAC, 60 Hz, Step-Down Isolation Transformer Provided
LON FTT-10A Free Topology:	Two Wire Twisted Pair
Recommended Cable Type:	Belden 85102
Dimensions:	4"W x 6"H x 2"D

Related Downloads

VAV1000L Data Sheet