- (ACT-FA-8001)
• Fume Hood Controllers
- HMS 1650 Bacnet/N2
- HMS 1650 LON
- HMS 1600 LX
- HMS 1600L (LON)
- HMS 1600
- VAV 1000
• Lighting Products
- LP3500 Lighting Panel
- LP-CT Lighting Panel
• LITE Monitors
- FMS 1650LITE
- HMS 1650LITE
• Network Gateways
- Trigate Large
- Trigate Small
• Remote Monitors
- CMS 1650
- FMS 1650R
• Room Pressure Controllers
- FMS 1650 (Bacnet)
- FMS 1650L (LON)
- FMS 1650T (Thin)
- FMS 1630L
- FMS 1630B
- FMS 1630
- VAV 1000
• Sensors
- Motion
- Sash Height
• Venturi Valves
- Overview
- Operation
- Options
- Performance
Triatek ACT-FA-8001
A microprocessor based actuator with conditioned feedback, the Triatek
ACT-FA-8001 Actuator operates on a 24 VAC nominal power supply. Designed primarily for fume hood applications, these units deliver a minimum of 50 in. lb. or 5.6 Nm. torque at rated voltage.
The “zero & span” and “auto-stroking” features allows for the sequencing of several motors from the same input signal since the actuator field can be limited between 45 and 90 degrees while the input signal can be set to a portion of 2-10 VDC. Once programmed, the unit’s settings are permanently stored in the actuator’s non-volatile memory. In the event of an power outage, the unit returns under full torque to its selected fail-safe position.
Other features include:
• Zero & span adjustments
• Auto-stroking field limitation
• Non-volatile memory
• Sequencing of several motors from one input signal
| Power Supply: | 22-26-VAC or 28-32 VDC |
| Max Power Consumption: | 24VA Peak 15VA |
| Wire Size: | 18 AWG minimum |
| Control Signal: | 4-20 mA Output; 2-10 VDC ext. wired |
| Torque: | 50 in. lb. 5.6 Nm. at rated voltage |
| Rotation Angle: | 0-90 degrees; mechanically adjustable |
| Stroke Time: | 44 ms/degree of rotation |
| Typical Control (10 - 30 deg. stroke): | 0.5 - 1.0 seconds |
| Weight: | approximately 3 lbs or 1.4 kilos |
| Ambient Temperature: | 0 - 140 deg. Farenheit |
