Triatek Products
Actuators
  -
(ACT-FA-8001)

Fume Hood Controllers
  - HMS 1650 Bacnet/N2
  - HMS 1650 LON
  - HMS 1600 LX
  - HMS 1600L (LON)
  - HMS 1600
  - VAV 1000

Lighting Products
  - LP3500 Lighting Panel
  - LP-CT Lighting Panel

LITE Monitors
  - FMS 1650LITE
  - HMS 1650LITE

Network Gateways
  - Trigate Large
  - Trigate Small

Remote Monitors
  - CMS 1650
  - FMS 1650R

Room Pressure Controllers
  - FMS 1650 (Bacnet)
 
 - FMS 1650L (LON)
  - FMS 1650T (Thin)
  - FMS 1630L
  - FMS 1630B
  - FMS 1630
  - VAV 1000

Sensors
  - Motion
  - Sash Height

Venturi Valves
  - Overview
  - Operation
  - Options
  - Performance
Isolation Room Pressure Controller:
FMS-1630L

For building systems using the LON open protocol, room pressure can be monitored and controlled with Triatek’s FMS-1630L. This unit is a precision measuring system for ultra low pressure or flow. Variances as small as 0.0001” WC can be measured with the FMS-1630L and its patented MicroMachined “Though The Wall” Airflow Sensor. Positive Pressure, Negative Pressure, or No Isolation modes are easily selectable and locked using the included key.isolation room controller

Room pressurization conditions can be quickly observed by scanning the easily read LCD display and the LED room status lights which indicate a Normal, Caution, or Alarm room state. Alarms can also be annunciated locally via the unit’s audible alarm and can be transmitted to a remote location or console using its two alarm outputs. If desired, the unit can be set for floating point control simply by programming in PID constants. Parameters are stored in
non-volatile memory to avoid any loss of information during a power outage or disruption.

The unit is available with either one internal or flush mounted sensor. The two wire external remote sensor can be located up to 4,000 feet away and uses a 4–20 mA signal.

Quick Specs
4 Analog Inputs: 4-20mADC, 0-5VDC or 0-10VDC
4 Analog Outputs: 0-5VDC or 0-10VDC
4 Digital Inputs: 0-5, 0-24VDC
4 Relay Outputs: (2A@24VDC, 2A@120VAC
Input Impedance: 10k - 0 Ω
Output Impedance: 0 Ω -10k
Control Signal Wire Size: 18 AWG Minimum
Power Supply: (Class 2 24 VAC/DC ± 10%, 10 VA; 110 to 24 VAC, 60 Hz, Step-Down Isolation Transformer   provided
Communication: LON FTT-10A Free Topology, Two Wire
  Twisted Pair
Recommended Cable Type: Belden 85102
Related Downloads