The ACT-FA-9001 Smart Actuator is a maintenance-free, fast-acting actuator that provides performance data and diagnostic information for Venturi air valves.
The ACT-FA-9001 features a brushless motor and patented Enerdrive fail-safe system. The actuator’s quiet motor was designed to accommodate laboratory and hospital settings with exposed duct work for a more conducive work environment.
Performance data is retrieved through a pigtail communications pair, and the software enables you to harvest performance information like cycle counts, so that unstable control loops can be better tuned, creating longer product lifespans.
The ACT-FA-9001 is factory-calibrated and can also be used on Triatek’s Venturi Valve Upgrade Kit to retrofit older, previously installed valves.
- Provides performance data including cycle count tracking and diagnostic information
- Access window for easy connectivity to DIP switch
- Quiet, brushless DC-driven motor
- Contactless feedback position sensor
- Fast-acting 3 to 5 seconds
- Provides increased reliability
- Mounts easily onto valves
- Manual clutch with electronic disengagement of motor
- Maintenance-free
- Position indicator
- Fail-safe by Enerdrive System (US Patent #5,278,454)
- Auto-stroke on power up
- Connects into any building automation system with a 0-10V, 2-10V, 4-20mA control signal
- Seamlessly functions with Triatek’s Venturi valves, Universal Valve Module, Venturi Valve Upgrade Kit, and other brand Venturi air valves
- UL, SAC, and CE listed
- ± 1% positional accuracy
The ACT-FA-9001 Smart Actuator is a maintenance-free, fast-acting actuator that provides performance data and diagnostic information for Venturi air valves.
The ACT-FA-9001 features a brushless motor and patented Enerdrive fail-safe system. The actuator’s quiet motor was designed to accommodate laboratory and hospital settings with exposed duct work for a more conducive work environment.
Performance data is retrieved through a pigtail communications pair, and the software enables you to harvest performance information like cycle counts, so that unstable control loops can be better tuned, creating longer product lifespans.
The ACT-FA-9001 is factory-calibrated and can also be used on Triatek’s Ventui Valve Upgrade Kit to retrofit older, previously installed valves.
- Torque50 in. lb. [5.6 Nm] at rated voltage
- Holding Torque50 in. lb. [5.6 Nm] at rated voltage
- Running Time3.5 to 4.5 seconds torque dependent
- Optional Fail Safe (Enerdrive)Default: fail open
- Power Consumption20VA / with fail-safe option: 24VA peak, 20VA
- Power Supply22 to 26 Vac; 28 to 32 Vdc; 50/60 Hz
- Communication Connection
- (for performance data)24 AWG twisted-shield cable (Belden 9841 or equivalent)
- Electrical Connection4-wire and 3-wire plenum cables (black) 22 AWG [0.34mm²], 36” (90cm) long
- 2-wire plenum cable (black) 22 AWG [0.34mm²], 9” (24cm) long
- Control Signals4-20mA, 0-10Vdc, 2-10Vdc, (DIP switch selectable) / 24Vac floating
- Feedback Signals4-20mA or 2-10Vdc (DIP switch selectable)
- Angle of Rotation0° to 90°, mechanically adjustable (default: 90° stroke)
- Direction of RotationReversible, CW: Clockwise, CCW: Counter Clockwise (default: CW)
- Inlet Bushing2 inlet bushings: 5/8” [15.9mm] and 7/8” [22.2mm]
- Ingress ProtectionIP22 equivalent to Nema type 2, IP54 equivalent to Nema type 3R
- if water tight inlet bushings (not supplied) are installed
- Operating Temperature0° F to +122°F [-18°C to +50°C]
- Storage Temperature-22°F to +122°F [-30°C to +50°C]
- Relative Humidity5 to 95% non-condensing
- Weight2.5 lb. [1.1kg]
- DimensionsA= 1.50” [38.1 mm] B= 3.26” [82.8mm] C= 6.60” [167.5mm] D=3.01” [76.4mm]